Features: Excellent slip resistance, fast curing, high transparency and high adhesion.
Application: Suitable for silk screen printing on fabric surfaces.
Technical sheet:
| Typical PropertiesDat | |
| Model | HL-Y5030 |
| Appearance | Transparent/Translucent |
| Hardness (Shore A) | 30±2 |
| A. Mixed weight ratio of component B (A:B) | 1: 1 or 10:1 |
| Dynamic viscosity (mpa.s) | 60000-100000 |
| Tensile strength (MPa) | 4.6 |
| Tear strength (kN/m) | 19±2 |
| Elongation (%) | 360 |
| Operation time (h) | 12-24h |
| Vulcanization time (min, 100-120 °℃) | 10-20 min |
●The physical property data listed in the above table is for reference only.
●Sulfurization conditions: 125 ℃ for 10 minutes.
●The inspection report accompanying the goods is only obtained by the quality inspection department based on the company's vulcanization conditions and testing methods; Due to differences in vulcanization conditions and testing methods, we cannot guarantee that both parties will obtain the same test results. We recommend that users use the test data obtained under their own testing conditions as a reference for performance; The above performance data and applicable recommendations are only a reference for the performance of the company's products, and are not a guarantee of the effectiveness or universality of the company's products in specific applications.
Hot Tags: Liquid Silicone Rubber for Screen Printing, China Liquid Silicone Rubber for Screen Printing manufacturers, suppliers, factory, liquid silicone rubber molding
