Yes, but the time and temperature need to be controlled.
Silicone pacifiers can be boiled in boiling water for sterilization, but the following key points should be noted:
1. High temperature resistance and sterilization method
The raw material of silicone pacifiers is food-grade LSR silicone, which can withstand high temperatures above 100°C (some products reach 120-140°C), suitable for boiling sterilization.
Recommended boiling time: 3-5 minutes (100°C boiling water), avoid more than 5 minutes to prevent deformation or accelerated aging.
If steam sterilization is used, it is recommended to steam at 100°C for 12-15 minutes, which is more effective and less damaging to the material.
2. Operation precautions
Complete immersion: Make sure the pacifier is completely immersed in water to avoid deformation caused by local overheating.
Avoid contact with the pot wall: Direct contact with high-temperature metal may cause local overheating.
Use after cooling: After boiling, it needs to be cooled to a suitable temperature before using it for babies to prevent scalding.
3. Differences from other materials
Latex pacifiers: Poor temperature resistance (recommended below 70°C, boiled for no more than 2 minutes), not suitable for long-term boiling in boiling water.
Plastic pacifiers: High temperatures may release harmful substances, boiling sterilization is not recommended.
4. Long-term use recommendations
Even if properly sterilized, silicone pacifiers will gradually age, it is recommended to replace them every 2-3 months.
If the pacifier is found to be sticky, hard or deformed, it should be replaced immediately.
