Features: Good insulation performance, easy to process, suitable for molding or extrusion.
Application: The molded product is mainly used for cold shrink cable accessories, cable accessories (couplers, power cabinets, cable joints and terminals), hollow insulation sleeves, etc.
Technical sheet:
| Performance | MODEL NUMBER | ||
| Project | Unit | HL-6141L | HL-6140L |
| Shore hardness | Shore A | 40±3 | 40±3 |
| Appearance | 乳白色 | 乳白色 | |
| Plasticity | 165-205 | 160-200 | |
| Density | g/cm³ | 1.12±0.03 | 1.12±0.03 |
| Tensile strength | MPa | ≥8.0 | ≥8.0 |
| Elongation | % | ≥700 | ≥700 |
| Permanent set | % | ≤5.0 | ≤5.0 |
| Tear strength | KN/m | ≥25 | ≥30 |
| Linear shrinkage rate | % | 3.2-3.5 | 3.2-3.5 |
| Dielectric constant | 2.5 | 2.8 | |
| Volume resistivity | Ω·cm | ≥2.0x10^16 | ≥2.0x10^{16 |
| Breakdown voltage | KV/mm | 28 | 28 |
● Physical data in the above table is for reference only.
● Sulfurization conditions: 175 ℃ for 5 minutes, with a liquid vulcanizing agent addition ratio of 0.65%, mainly composed of 2,5-dimethyl-2,5-di (tert butylperoxy) hexane.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can't guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Hot Tags: Silicone Rubber for Power Cable Accessories, China Silicone Rubber for Power Cable Accessories manufacturers, suppliers, factory, silicone rubber tape, black silicone rubber, silicone extrusion manufacturers, diamond driven liquid silicone compound, lsr rubber, cheap liquid silicone
