Product Features:
Hardness of 20 degrees, high elongation, low hardness, no whitening when boiled in water, customizable;
Product Application:
Mainly used for low hardness silicone products such as swim caps and cling film.
Technical sheet:
| Model | Appearance | Hardness (Shore) | Tensilestrength (Mpa) | Elongation(%/o) | Tearstrength(KN/M) | Plasticity(%) | Density(g/cm3) |
| HL-718S | Transparent | 20(±2) | 5.5 | 700 | 10 | 90~100 | 1.07 |
● Physical data in the above table is for reference only.
● Vulcanization condition: 175℃* 5Min.
● Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can't guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Hot Tags: silicone rubber for swim caps, China silicone rubber for swim caps manufacturers, suppliers, factory, 100 liquid silicone, best liquid silicone for mold making, biocompatible silicone rubber, liquid rubber for mould making, liquid silicone rubber for mold making, realistic rubber face mask
